MEXC Futures Funding Rate: Calculation Methods and How to View Funding Rates
1. What Is the Funding Rate?The funding rate is a key mechanism in the perpetual futures market that helps keep futures prices aligned with spot prices. Through this mechanism, long and short position holders periodically pay fees to each other at a fixed rate. MEXC does not charge any fees for funding payments.Positive funding rate: Long position holders pay funding fees to short position holdersNegative funding rate: Short position holders pay funding fees to long position holdersThe funding fee is calculated as follows: Funding Fee = Position Value × Funding RateNote that funding fee deductions may affect your liquidation price and final PNL. Funding settlement times vary by trading pair. Please refer to the information displayed on the official MEXC website for the exact schedule.2. Why Do Perpetual Futures Require a Funding Rate Mechanism?The funding rate exists due to dynamic changes in market supply and demand. When a large number of traders hold positions in the same direction, futures prices may deviate from the underlying spot index price, potentially causing abnormal market fluctuations.The funding rate mechanism uses economic incentives to guide trader behavior, encouraging futures prices to realign with the underlying asset price. This mechanism effectively prevents excessive price deviations and reduces the risk of market manipulation. For experienced traders, funding rates can also present additional profit opportunities.3. How to Check the Current Funding Rate on MEXC?On the MEXC Futures trading page, you can directly view the current funding rate and the funding countdown for each Futures trading pair. As funding rates differ across trading pairs, simply switch between pairs to check the relevant information.*BTN-Open Futures Trading&BTNURL=https://www.mexc.com/futures/BTC_USDT* 4. Detailed Funding Fee Calculation MethodsMEXC supports two Futures modes, each with a slightly different funding fee calculation method.4.1 Funding Fee Calculation for Stablecoin-Margined Futures Funding Fee = Position Value × Funding Rate
Position Value = Position Size (crypto quantity) × Fair PriceExample: Assume Trader A holds a long position of 10 BTC in BTCUSDT Perpetual Futures. The current fair price is 10,000 USDT, and the funding rate is 0.01%.Position value = 10 × 10,000 = 100,000 USDTFunding fee = 100,000 × 0.01% = 10 USDTSince the funding rate is positive, Trader A (the long position holder) must pay 10 USDT, while short position holders with the same position size will receive 10 USDT.4.2 Coin-Margined Futures Funding Fee CalculationFunding Fee = Position Value × Funding Rate
Position Value = Position Size (Cont) × Contract Value / Fair PriceExample: Assume Trader A holds 100 cont. of BTCUSD long position, with each cont. having a value of $100. The current fair price is 10,000 USDT, and the funding rate is 0.01%.Position value = 100 × 100 / 10,000 = 1 BTCFunding fee = 1 BTC × 0.01% = 0.0001 BTCSince the funding rate is positive, Trader A must pay 0.0001 BTC, while the corresponding short position holders will receive 0.0001 BTC.5. Funding Settlement Time and Fee RulesFunding fees are generally settled every 8 hours, at 00:00, 08:00, and 16:00 (UTC). Only users who hold open positions at the settlement time are required to pay or receive funding fees. Positions closed before the settlement time will not incur any funding fees. The entire process is fully automated, with funding fees directly exchanged between Futures position holders.Please note:1. Funding fee settlement may be delayed by up to 15 seconds due to batch processing. Positions opened shortly after the settlement time, such as 08:00:05 (UTC), may still be included in the current settlement, whether the trader pays or receives the fee.2. Funding fee settlement times may vary by Futures trading pair. Please refer to the product page for details.*BTN-View Funding Rates&BTNURL=https://www.mexc.com/futures/information/funding_list* 6. How to Check Paid or Received Funding Fee Records?Web: Go to theOrders page and select Funding Fees to view detailed records.App: Tap Profile Icon → Transactions → Futures Orders → Capital Flow, then use Filter to select Funding Feeand tap Confirm to view the records.7. How to View Historical Funding Rate Data?Web: Visit the MEXCFunding Rate History page to view complete historical data.App: From the app homepage, enter Futures, tap the Funding/Countdown section, then select View funding rate history to access historical funding data.Recommended Reading:Futures Trading FAQ: A Complete Beginner's GuideHow to Trade Futures on the MEXC AppHow to Trade Futures on MEXC WebTime in Force (TIF) for Futures Trading: A Complete GuideFAQ on Auto-Deleveraging (ADL)FAQ on Index Price, Fair Price, and Last Price
MEXC Futures Loss Coverage FAQ
1. Futures Loss Coverage Voucher Basics1.1 What is a Futures loss coverage?A Futures loss coverage is a form of trading protection offered by MEXC. When you use this voucher for Futures trading and incur a loss, the platform will compensate your loss up to the voucher's coverage limit in the form of a Futures bonus, helping reduce risk and trade with greater confidence.Reminder: Each Futures loss coverage has a maximum compensation amount. Please refer to the information displayed on the voucher you received for the exact amount.1.2 What are the compensation rules?Compensation amount = Your actual realized loss upon closing the position (excluding trading fees)If the loss amount is less than the voucher value, the full actual loss will be compensated.If the loss amount is greater than the voucher value, compensation will be capped at the voucher's maximum face value.Example: Assume you hold a 50 USDT Futures loss coverage. If your realized loss upon closing is 30 USDT, you will receive 30 USDT in compensation. If your realized loss is 80 USDT, you will receive 50 USDT in compensation, which is the maximum value of the voucher.1.3 When will the compensation be credited?Compensation is usually credited automatically immediately after the position is closed. You can check the compensated amount on the voucher in the Voucher Center, and the Futures bonus will be credited directly to your Futures account.1.4 Which order types support the use of Futures loss coverage?SupportedNot supportedLimit OrderTrailing Stop OrderMarket OrderTrigger OrderChase Limit OrderPost OnlyNote: Grid trading and copy trading do not support Futures loss coverage.2. Selecting and Using Futures Loss Coverage2.1 How do I select a Futures loss coverage on the Futures trading page?Follow these steps:Go to the Futures trading page and set your order parameters.During order confirmation, the page will display the Futures loss coverage option.Tap this option to open the voucher selection pop-up.Select the Futures loss coverage you want to use, then confirm the order.2.2 How does the system automatically select a Futures loss coverage ?If you have multiple available Futures loss coverage vouchers, the system will automatically select one based on the following priority:Priority 1: Earliest expiration time
The system will first select the voucher that is closest to expiring.Priority 2: Highest compensation amount
If multiple vouchers share the same expiration time, the system will select the one with the highest compensation limit.Priority 3: Earliest distribution time
If multiple vouchers still qualify, the system will select the one that was distributed earliest.2.3 How can I check whether my current position or order is using a Futures loss coverage?If you have already used Futures loss coverage, you can check it in the following places:Current Positions: The "Loss Coverage Applied" label will be displayed.Open Orders: The "Loss Coverage Applied" label will be displayed.Tap the label to view the detailed usage rules of the Futures loss coverage voucher.2.4 Where can I view my Futures loss coverage?You can view your compensation in Position History or in the Voucher Center.3. Futures Loss Coverage Status and Reminder3.1 Will I receive a reminder before my Futures loss coverage expires?Yes. When there are less than 24 hours remaining before the voucher expires, the system will automatically display a countdown reminder so you can use it in time.3.2 What happens to the Futures loss coverage after I cancel an order?After an order is canceled, the voucher status will automatically revert:If the Futures loss coverage voucher is still within its validity period, its status will return to Unused, and you may continue using it for other orders.If the Futures loss coverage has already expired, its status will change to Expired and it can no longer be used.3.3 Will the system notify me if the Futures loss coverage is expiring when I cancel an order or close a position?Yes. Whether you cancel a single order, cancel all orders with one tap, or close a position with one tap, if the related order used Futures loss coverage and the voucher has less than 24 hours remaining before expiration, including already expired vouchers, the system will display an expiration reminder.Reminder rules: The system will prioritize the voucher that is closest to expiring or has already expired. If there are multiple expired vouchers, the system will display the one with the highest amount. If the amounts are the same, it will display the voucher that was distributed earliest.4. Troubleshooting4.1 Why does my Futures loss coverage show as unavailable?If you hold Futures loss coverage but it shows as unavailable, please check the following:There is an existing position or open order for the current trading pair:
Make sure there is no active position or open order for the trading pair you are currently trading, such as BTCUSDT. Otherwise, the voucher cannot be used.KYC verification is incomplete:
Please make sure you have completed the required Primary or Advanced KYC Verification.The selected order type is not supported:
Please use limit order, market order, chase limit order, or post only. Trailing stop orders and trigger orders do not currently support Futures loss coverage vouchers.A Futures loss coverage is a risk protection tool provided by MEXC for Futures trading. When used properly, it can effectively reduce trading risk. It is recommended that you keep an eye on the voucher's validity period and use it before expiration to make full use of this benefit. For further questions, please contact MEXC Customer Service for assistance.Recommended reading:Usage Instructions for Futures Bonuses, Position Airdrops, and VouchersFAQ on MEXC APR BoosterWhat Is a Copy Trade Bonus?
FAQ on Guaranteed Stop-Loss
1. What is guaranteed stop-loss?Guaranteed Stop Loss (GSL) is a paid risk management feature designed to help traders handle extreme market volatility. When you place a Guaranteed SL order, your stop-loss is guaranteed to execute at the trigger price you specify. This helps cap maximum losses and effectively eliminates slippage risk.2. What is the difference between guaranteed stop-loss and a regular stop loss?Understanding the difference between guaranteed SL and regular stop loss orders is essential for effective risk management. A regular stop-loss is typically executed at market price once triggered. During periods of high volatility, significant slippage may occur, causing the final fill price to deviate from your intended stop price. A guaranteed SL ensures execution at the specified trigger price regardless of market conditions, providing a more stable and predictable exit.3. Which trading pairs support guaranteed SL?Guaranteed SL is only available for selected trading pairs. Refer to the actual display on the trading or order placement page to confirm whether a specific pair supports guaranteed SL.4. Which trigger price types are supported by guaranteed SL?Guaranteed SL only supports the last price as the trigger price. Triggering based on fair price, mark price, or index price is not supported.5. Is there a fee for using guaranteed stop-loss?Yes. Using guaranteed stop-loss incurs an additional fee. Fees are set per trading pair, and the applicable rate is shown on the trading page.6. When is the guaranteed stop-loss fee charged?The fee is charged only when the order is triggered and successfully filled:Not triggered: no feeTriggered but not executed: no feeTriggered and filled: fee charged7. How is the fee calculated?The fee rate varies by trading pair and is generally calculated based on the notional value of the filled stop loss order. Example:GSL fee = Filled notional value × GSL fee rateNotional value (USDT-M example) = Filled quantity × fill priceNote: Refer to the trading page for the exact fee rate.8. Does guaranteed stop-loss guarantee execution?Guaranteed SL is designed to execute when trigger conditions are met, but it does not guarantee that triggering or execution will always succeed. In extreme market conditions, system congestion, or other exceptional circumstances, trigger delays, trigger failure, or non-execution may occur. If a guaranteed stop-loss order is not triggered or not executed, no fee will be charged.9. Can I modify or cancel a guaranteed stop-loss order?Yes. You can modify or cancel a guaranteed stop-loss through the TP/SL settings in your order or position. Any changes will take effect immediately based on the latest settings.10. Why can't I see the Guaranteed Stop Loss option?If the guaranteed SL option is not visible, possible reasons include:The current trading pair does not support guaranteed stop-lossThe feature is unavailable for certain regions, account types, or risk levels. Please refer to on-page notices for applicable restrictionsRecommended Reading:What Is a MEXC Futures Guaranteed Stop-Loss OrderHow to Trade Futures on the MEXC App How to Trade Futures on MEXC Web Futures Trading FAQ: A Complete Beginner's Guide MEXC Futures Market Order FAQ
MEXC Futures Trailing Stop Order FAQs
1. What is a trailing stop order?A trailing stop order is a strategic order that tracks the market price, allowing users to preset an order within a specific price range defined by a percentage or a fixed value relative to the market price during volatility. When the market trend reverses and pulls back, the trailing stop order submits the trader's configured order to the market.As the price moves in a favorable direction, the trailing stop order adjusts accordingly. As long as the price continues to move favorably, the trigger price will follow, helping users lock in profits while riding the trend. If the price moves in the opposite direction by a specified percentage, the system automatically submits a market order to reduce or close the position. This helps limit losses and protect gains during unfavorable market movements.A key feature that distinguishes a trailing stop order from a standard limit order is that the trigger price never moves in the opposite direction. Once it moves up for a sell order or down for a buy order with the market, it stays at that level even if the market retraces.*BTN-Start Your Futures Journey&BTNURL=https://www.mexc.com/futures/BTC_USDT*2. How is the trigger price for a trailing stop order calculated?The calculation of the trigger price depends on the trading direction:For sell orders (long position): The actual trigger price equals the all-time high price minus the trail variance (price distance), or the highest historical price multiplied by (1 - trail variance percentage).Example: If the highest historical price is 50,000 USDT and the trail variance is set to 5%, the trigger price is calculated as 50,000 × (1 − 5%) = 47,500 USDTFor buy orders (short position): The actual trigger price equals the lowest historical market price plus the trail variance, or the lowest historical price multiplied by (1 + trail variance percentage).Example: If the lowest historical price is 20,000 USDT and the trail variance is 5%, the trigger price is calculated as 20,000 × (1 + 5%) = 21,000 USDT3. What is the trail variance?The trail variance is the primary condition used to calculate the actual trigger price. Users can set this using two methods: Percentage or price distance.Percentage: Assuming the highest historical price is 50,000 USDT and the trail variance is set to 5%, Trigger Price = 50,000 × (1 − 5%) = 47,500 USDTPrice Distance: Assuming the highest historical price is 50,000 USDT and the trail variance is set to 5,000 USDT, Trigger Price = 50,000 − 5,000 = 47,500 USDT4. What is the activation price for a trailing stop order?The activation price is the condition required to activate a trailing stop order. The order becomes active only when the specified price type (last price, fair price, or index price) reaches or exceeds the activation price. The system begins calculating the actual trigger price only after the order has been activated.If no activation price is set, the order will be activated immediately upon placement. Setting an activation price helps users precisely control when the order becomes effective, preventing the order from triggering at unfavorable price levels.5. In which trading scenarios are trailing stop orders applicable?Trailing stop orders are primarily suitable for the following trading scenarios:1) Buying on a Rebound: When a user anticipates that the market will continue to fall but expects a rebound at a certain level, they can set a trailing stop order to automatically buy once the rebound reaches a specific magnitude. Example: Current BTC price is 39,000 USDT. The user predicts the price may drop to 37,000 USDT before rebounding and wishes to buy when the rebound reaches 1%. They can set a buy trailing stop order with an Activation Price of 37,000 USDT and a trail variance of 1%.2) Selling on a Pullback: When a user anticipates that the market will continue to rise but expects a pullback after reaching a certain peak, they can set a trailing stop order to automatically sell once the pullback reaches a specific magnitude. Example: Current BTC price is 40,000 USDT. The user predicts the price may rise to 42,000 USDT before falling and wishes to sell when the drop reaches 1%. They can set a sell trailing stop order with an activation price of 42,000 USDT and a trailing stop distance of 1%.3) Locking in Profits: When the price of a held position continues to rise, a trailing stop order helps users automatically lock in profits, ensuring they do not miss the optimal exit opportunity if the price reverses.4) Limiting Losses: During a market decline, trailing stop orders can be used to protect capital and prevent losses from expanding due to sharp price corrections.6. What are the pros and cons of trailing stop orders?The primary advantages of trailing stop orders lie in the controllability of the profit model and the replicability of the trading strategy. They enable traders to dynamically adjust the trigger price during volatile market conditions, allowing them to maximize profits in favorable trends while effectively controlling losses in unfavorable ones.The main disadvantage is that due to the high volatility of the cryptocurrency market, setting the appropriate trail variance can be challenging. If set too tight, normal market fluctuations may trigger the order prematurely, causing you to exit the position too early and miss out on further potential profits. If set too wide, the order may fail to trigger in time during a reversal, resulting in missed opportunities to lock in profits or limit losses.7. How to set up a trailing stop order on MEXC?Web: Navigate to the Futures trading page, select Trailing Stop, enter the Trail Variance and Quantity, set the Activation Price, and then click Open Long or Open Short.Once set, you can view the configured orders in the Open Orders → Trailing Stop list, and modify or Cancel them at any time.App: Navigate to the Futures trading page, select Trailing Stop, enter the Ratio and Quantity, set the Activation Price, and then click Open Long or Open Short.Once set, you can view the configured orders in the Open Orders → Trailing Stop list, and modify or Cancel them at any time.8. How to view and edit existing trailing stop orders?On the MEXC official website and app, you can view all currently submitted trailing stop orders in the Open Orders list by switching the order type filter to Trailing Stop.For trailing stop orders with the status Pending Trigger, you can click the edit icon to modify them. Please note that orders with the status Active (currently tracking market movements) cannot be edited temporarily.To cancel a trailing stop order, click the delete icon on the Trailing Stop page to cancel a single order, or click the Cancel All button to revoke all trailing stop orders at once.Recommended ReadingMEXC Futures Limit Order FAQsMEXC Futures Chase Limit Order FAQsMEXC Futures Market Order FAQsMEXC Futures Trigger Order FAQsMEXC Futures Post-Only FAQsFAQ on Index Price, Fair Price, and Last Price
MEXC Margin Calculation Guide: Initial Margin, Maintenance Margin, and Liquidation Price Explained
In MEXC Futures trading, margin is a core concept that every trader must understand. Whether you are new to Futures trading or an experienced user looking to better understand margin calculations, this guide explains MEXC's margin formulas, liquidation mechanism, and how to manage position risk effectively.1. Position Value: The Basis of Margin CalculationPosition value is the fundamental data used to calculate all margin requirements. In MEXC Futures trading, opening any position requires margin, and the position value determines how much capital is needed.USDT-margined position value = Fill price × Contract size × Position sizeCoin-margined position value = Position size × Contract value / PriceExample:
Suppose you buy 100 BTCUSDT perpetual contracts at a price of 50,000 USDT, each with a contract size of 0.0001 BTC.Position value = 50,000 × 0.0001 × 100 = 500 USDT2. Initial Margin: Funds Required to Open a PositionInitial margin is the minimum amount of funds required to open a position. The initial margin rate directly reflects the leverage you use. The higher the leverage, the lower the required initial margin.Initial margin rate = Position margin / Position valueUSDT-margined initial margin = Average fill price × Position size × Contract size / LeverageCoin-margined initial margin = Position size × Contract value / (Average fill price × Leverage)Example:
You open a BTCUSDT position at 50,000 USDT, with a position value of 500 USDT, using 10× leverage.Initial margin = 500 / 10 = 50 USDTThis means you only need to commit 50 USDT to control a position worth 500 USDT.3. Maintenance Margin: Minimum Requirement to Avoid LiquidationMaintenance margin is the minimum amount of margin required to keep a position open.If your account margin falls below the maintenance margin level, liquidation or partial liquidation will be triggered.USDT-margined maintenance margin = Average fill price × Position size × Contract size × Maintenance margin rateCoin-margined maintenance margin = Contract value × Position size / Average fill price × Maintenance margin rateExample
Suppose your position value is 500 USDT, and the maintenance margin rate is 0.5%.Maintenance margin = 500 × 0.5% = 2.5 USDTAs long as your position margin plus unrealized PNL remains above 2.5 USDT, the position can be maintained.4. Margin Rate: Key Indicator of Position RiskMargin rate is the key metric used to measure position risk.
The lower the margin rate, the lower the risk. When the margin rate reaches 100%, the position will be liquidated.Margin rate = (Maintenance margin + Liquidation fee) / (Position margin + Unrealized PNL)Example
Your maintenance margin is 2.5 USDT, liquidation fee is 0.5 USDT, position margin is 50 USDT, and current unrealized loss is 20 USDT (unrealized PNL = −20).Margin rate = (2.5 + 0.5) / (50 − 20) = 3 / 30 = 10%, indicating low risk.If the unrealized loss increases to 47 USDT, margin rate = 3 / 3 = 100%, and liquidation will be triggered.5. Opening Cost: Total Funds Frozen When Opening a PositionOpening cost is the total amount of assets that must be frozen when opening a position. It includes the initial margin and any applicable trading fees.
The fee depends on whether your order is executed as a Maker (limit order) or Taker (market order).Opening cost = Initial margin + Estimated fee (depends on Maker / Taker execution)USDT-margined Futures: Order cost = Average fill price × Order quantity × Contract size / LeverageCoin-margined Futures: Order cost = Order quantity × Contract value / (Leverage × Average fill price)Example:
You open a position with a value of 500 USDT using 10× leverage, and the taker fee rate is 0.02%.Initial margin = 50 USDTEstimated fee = 500 × 0.02% = 0.1 USDTOpening cost = 50 + 0.1 = 50.1 USDT6. Position Margin: Key Data for Liquidation DecisionsPosition margin is a key factor the system uses to determine whether liquidation will be triggered.
When position margin plus unrealized PNL falls below the maintenance margin, liquidation will occur.Position margin = Average fill price × Position size × Contract size / Leverage7. Liquidation Price in Isolated Margin Mode: Precise Calculation of the Liquidation LevelIn isolated margin mode, the margin of each position is independent. If the margin of a specific position plus its unrealized PNL falls below the maintenance margin, that position will be liquidated.Liquidation condition:
Position margin + Unrealized PNL ≤ Maintenance marginLong position liquidation price
= (Maintenance margin − Position margin + Average fill price × Position size × Contract size) / (Quantity × Contract size)Short position liquidation price
= (Average fill price × Position size × Contract size − Maintenance margin + Position margin) / (Quantity × Contract size)Example
You open a BTC long position at 50,000 USDT, with a position value of 500 USDT, using 10× leverage (position margin = 50 USDT). Maintenance margin = 2.5 USDTQuantity × Contract size = 0.01 BTCLong liquidation price = (2.5 − 50 + 500) / 0.01 = 452.5 / 0.01 = 45,250 USDTThis means your long position will be liquidated if BTC falls to approximately 45,250 USDT.8. Cross Margin Mode: Margin Calculation and Differences from Isolated ModeIn cross margin mode, the system uses all available margins in your account as position margins to reduce the risk of liquidation. However, if one position incurs losses and reduces the available balance, those funds are not immediately reallocated as margin for other cross-margin positions.Key characteristics of cross margin mode:All available funds share the risk across positionsSuitable for traders with strong confidence in their market outlookIf liquidation occurs, losses may affect all available funds in the account9. Auto-Margin Addition: The Last Line of Defense for Your PositionThe auto-margin addition feature automatically transfers funds from your available balance to your position margin when the position approaches liquidation. This helps protect your position and avoid forced liquidation. It serves as the final line of defense for maintaining a position.USDT-margined Futures:
Margin added per addition
= Average fill price × Contract size × Position size × Maintenance margin rateCoin-margined Futures:
Margin added per addition
= Contract value × Position size × Maintenance margin rate / Average fill priceExample:
You hold a BTCUSDT long position with an average fill price of 50,000 USDT, a position value of 500 USDT, and a maintenance margin rate of 0.5%. When auto-margin addition is triggered, the system adds 500 × 0.5% = 2.5 USDT each time.10. Margin FAQs10.1 What happens if the margin is insufficient?When your position margin plus unrealized PNL falls below the maintenance margin requirement, the system will trigger forced liquidation. In isolated margin mode, only that position is liquidated. In cross-margin mode, liquidation may affect all positions.Example:
You open a long position with a 50 USDT margin, and the maintenance margin is 2.5 USDT. If market losses reach 47.5 USDT, then:Position margin + Unrealized PNL = 50 − 47.5 = 2.5 USDTThis equals the maintenance margin, and liquidation is triggered.10.2 How can I reduce margin rate and lower liquidation risk?You can reduce risk by:Manually adding marginReducing leveragePartially closing the position to reduce sizeEnabling auto-margin additionExample
If your margin rate is 80% (close to liquidation), adding 20 USDT margin may reduce the margin rate to about 50%, significantly lowering liquidation risk.10.3 How do I choose between isolated margin and cross margin?Isolated margin mode is suitable for traders who want to isolate risk. Each position is calculated independently, and liquidation of one position does not affect others.Cross margin mode is suitable for traders who want stronger risk resistance. All available funds share risk across positions, but losses can be larger if liquidation occurs.Example
Your account has 1,000 USDT, and you open two positions (A and B), each using a 100 USDT margin.In isolated margin mode, if position A is liquidated, the maximum loss is 100 USDT. Position B and the remaining 800 USDT are unaffected.In cross margin mode, if position A continues to lose, the system may use the remaining 800 USDT to maintain the position. In extreme cases, the entire 1,000 USDT may be lost.10.4 Can margin be withdrawn at any time?Available margin that is not being used by positions can be withdrawn at any time. Position margin currently in use can only be released after the position is closed.Example
Your account balance is 500 USDT, of which 100 USDT is used as position margin and 400 USDT is available balance. You can withdraw up to 400 USDT. The remaining 100 USDT can only be withdrawn after the position is closed.Recommended Readings:MEXC Futures Calculation Guide: Fees, Unrealized PNL, and Closing Profit ExplainedHow to Trade Futures on the MEXC AppHow to Trade Futures on MEXC WebMEXC Futures Funding Rate: Calculation Methods and How to View Funding RatesFutures Trading Page Terminology Guide
MEXC Futures Calculation Guide: Fees, Unrealized PNL, and Closing Profit Explained
1. MEXC Futures Trading Fee CalculationMEXC Futures trading fees are determined by whether your order is executed as a Maker (limit order) or Taker (market order).FormulasTaker fee = Average fill price × Position size × Contract size × Taker fee rateMaker fee = Average fill price × Position size × Contract size × Maker fee rateExampleAssume you buy 10,000 BTCUSDT contracts as a taker at 30,000 USDT, with a contract size of 0.0001 BTC.Fee = 30,000 × 10,000 × 0.0001 × 0.02% = 6 USDT2. MEXC Futures Funding Fee Calculation and Settlement RulesFunding fees are a mechanism unique to Perpetual Futures that balances holding costs between long and short positions.FormulasFunding fee = Funding rate × Position valuePosition value = Fair price × Number of contracts × Contract sizeWhether funding is paid or received depends on two factors: the funding rate (positive or negative) and your position direction (long or short). When the funding rate is positive, longs pay shorts. When the funding rate is negative, shorts pay longs. At settlement, position value is calculated using the current fair price.ExampleYou hold 10,000 BTCUSDT long contracts. The current fair price is 30,000 USDT, and the funding rate is +0.01%. Funding fee is then calculated as 30,000 × 10,000 × 0.0001 × 0.01% = 3 USDT (paid)If the funding rate is –0.01%, you will receive 3 USDT.3. MEXC Futures Closing PNL CalculationTotal realized PNL = Closing PNL + Funding fees − Opening fee − Closing fee3.1 USDT-Margined Futures Closing PNLLong closing PNL = (Closing price − Average entry price) × Position size × Contract sizeShort closing PNL = (Average entry price − Closing price) × Position size × Contract sizeExampleYou open 5,000 BTCUSDT long contracts at 28,000 USDT and close at 30,000 USDT.Closing PNL = (30,000 − 28,000) × 5,000 × 0.0001 = 1,000 USDT3.2 Coin-Margined Futures Closing PNLLong closing PNL = (1 / Average entry price − 1 / Closing price) × Position size × Contract valueShort closing PNL = (1 / Closing price − 1 / Average entry price) × Position size × Contract valueExampleYou open 100 BTC coin-margined contracts (contract value 100 USD) at 30,000 USDT and close at 33,000 USDT.Closing PNL = (1/30,000 − 1/33,000) × 100 × 100 = 0.0303 BTC4. MEXC Futures Unrealized PNLUnrealized PNL reflects the current unrealized profit or loss of an open position. It is calculated using the fair price, not the last traded price.4.1 USDT-Margined Unrealized PNLLong unrealizedPNL = (Fair price − Average entry price) × Position size × Contract sizeShort unrealizedPNL = (Average entry price − Fair price) × Position size × Contract size4.2 Coin-Margined UnrealizedPNLLong unrealizedPNL = (1 / Average entry price − 1 / Fair price) × Position size × Contract valueShort unrealizedPNL = (1 / Fair price − 1 / Average entry price) × Position size × Contract valueExampleYou hold 8,000 ETHUSDT long contracts, entry price 2,000 USDT, fair price 2,200 USDT, contract size 0.01 ETH.Unrealized PNL = (2200 − 2000) × 8000 × 0.01 = 16,000 USDT5. MEXC Futures ROI and Margin CalculationUnderstanding ROI and margin helps you better evaluate trading performance and manage risk.ROI= PNL / Initial marginInitial margin= Position value × Initial margin rateInitial margin rate= 1 / LeverageExampleYou open a position with 10× leverage, with a position value of 10,000 USDT.Initial margin rate = 1 / 10 = 10% Initial margin = 10,000 × 10% = 1,000 USDTIf profit = 500 USDT, ROI = 500 / 1000 = 50%6. MEXC Futures Bankruptcy Price CalculationThe bankruptcy price is the price at which the position margin is fully lost.Long bankruptcy price = (Position value − Position margin) / (Position size × Contract size)Short bankruptcy price = (Position value + Position margin) / (Position size × Contract size)ExampleYou hold 10,000 BTCUSDT long contracts.Position value = 3,000 USDTPosition margin = 300 USDTContract size = 0.0001Bankruptcy price = (3000 − 300) / (10,000 × 0.0001) = 2,700 USDT7. Full Futures PNL Calculation ExampleAssume a user opens a long position of 10,000 BTCUSDT perpetual contracts at 7,000 USDT as a taker. The taker fee rate is 0.02%, maker fee rate is 0%, funding rate is −0.025% (long receives), fair price is 7,000 USDT, and contract size is 0.0001 BTC.The opening fee is: 7000 × 10000 × 0.0001 × 0.02% = 1.4 USDTThe funding fee is: 7000 × 10000 × 0.0001 × (−0.025%) = −1.75 USDT (received)Assume the user closes the position at 8,000 USDT(taker). The closing PNL is: (8000 − 7000) × 10000 × 0.0001 = 1000 USDTThe closing fee is: 8000 × 10000 × 0.0001 × 0.02% = 1.6 USDTTherefore, the total realized PNL is: 1000 + 1.75 − 1.4 − 1.6 = 998.75 USDT8. MEXC Maximum Contracts CalculationBefore opening a position, understanding how to calculate the maximum number of contracts helps you plan position size more effectively.8.1 USDT-Margined Futures Maximum ContractsMaximum contracts = Initial margin × Leverage / Contract size / Entry priceExampleYou have 1,000 USDT margin, use 20× leverage, entry price 30,000 USDT, contract size 0.0001.Maximum contracts = 1000 × 20 / 0.0001 / 30000 = 6,666.67 contracts8.2 Coin-Margined Futures Maximum ContractsMaximum contracts = Order cost × Leverage × Average entry price / Contract valueExampleYou have 0.1 BTC margin, use 10× leverage, entry price 30,000 USDT, contract value 100 USD.Maximum contracts = 0.1 × 10 × 30000 / 100 = 300 contracts9. MEXC Average Entry Price Calculation (After Adding to a Position)When you add to an existing position, the average entry price must be recalculated.9.1 USDT-Margined Futures Average Entry PriceNew average entry price = (Original average price × Original position size + New entry price × New position size) / (Original position size + New position size)ExampleYour original position is 5,000 long contracts at 29,000 USDT.Add 3,000 contracts at 31,000 USDTNew average price = (29000 × 5000 + 31000 × 3000) / (5000 + 3000) = 29,750 USDT9.2 Coin-Margined Futures Average Entry PriceNew average entry price = (Original position size + New position size) / (Original position size / Original average price + New position size / New entry price)Example
Your original position is 100 contracts at 30,000 USDT.Add 50 contracts at 32,000 USDTNew average price = (100 + 50) / (100 / 30000 + 50 / 32000) = 30,638.3 USDT10. MEXC USDT-Margined Contract Unit ConversionThe following examples assume a contract size of 0.0001.ScenarioFormulaExampleContracts → USDTUSDT = Position size × Contract size × Current priceGiven: Position size = 23,405; Current Price = 27,076.2 USDT = 23,405 × 0.0001 × 27,076.2 = 63,371.8461 USDTUSDT → ContractsContracts = Position value / Current price / Contract sizeGiven: Position value = 63,371.8461 USDT; Current Price = 27,076.2Position size (Contracts) = 63,371.8461 / 27,076.2 / 0.0001 = 23,405Contracts → CoinCoin amount = Position size × Contract sizeGiven: Position size = 183Coin amount = 183 × 0.0001 = 0.0183 BTCCoin → ContractsPosition size = Coin amount / Contract sizeGiven: Coin amount = 0.0183 BTCPosition size (Contracts) = 0.0183 / 0.0001 = 18311. MEXC Coin-Margined Contract Unit ConversionThe following example assumes a contract value of 10 ETH.ScenarioFormulaExampleCoin amount → ContractsPosition size = Coin amount × Current Price / Contract valueGiven: Coin amount = 0.19 ETH; Current Price = 3,100 USDTPosition size = 0.19 × 3100 / 10 = 58.9 contracts12. MEXC Futures Account Asset CalculationUnderstanding how account assets are calculated helps you manage funds and control risk more effectively.Wallet balance = Bonus balance + Net transfers + Realized PNLAvailable balance = Wallet balance − Position margin − Order marginAvailable margin is calculated differently depending on whether auto-margin addition is supported:If not supported: Available margin = Available balance − Unrealized lossIf supported: Available margin = Available balance + Unrealized PNLExample
Your wallet balance is 5,000 USDT, position margin is 2,000 USDT, order margin is 500 USDT, and the current unrealized profit is 300 USDT. If auto-margin addition is supported:Available margin = (5000 − 2000 − 500) + 300 = 2,800 USDT.Recommended Readings:MEXC Margin Calculation Guide: Initial Margin, Maintenance Margin, and Liquidation Price ExplainedHow to Trade Futures on the MEXC AppHow to Trade Futures on MEXC WebMEXC Futures Funding Rate: Calculation Methods and How to View Funding RatesFutures Trading Page Terminology Guide
Common Questions About USDT-Margined and Coin-Margined Futures
1. What are USDT-Margined Futures?USDT-margined futures (also called linear contracts) are futures contracts that are priced and settled in stablecoins such as USDT or USDC. On MEXC, USDT and USDC are used as both the margin and settlement currency.The main advantage is that profits and losses are easy to understand in fiat terms. For example, if you earn 100 USDT from trading a USDT-margined contract, that is roughly equivalent to 100 USD. No complex conversions are required.2. What Are Coin-Margined Futures?Coin-margined futures (also called inverse contracts) are settled in the underlying cryptocurrency, such as BTC, ETH, or XRP. Traders do not need stablecoins as margin and can instead use the corresponding cryptocurrency directly.MEXC currently offers multiple coin-margined contracts, including BTC and ETH. The key advantage is capital efficiency. You can trade futures while holding your crypto, without converting it into stablecoins.3. What Is the Difference Between USDT-Margined and Coin-Margined Futures?Settlement currencyUSDT-margined futures are settled in stablecoins such as USDT or USDC.Coin-margined futures are settled in cryptocurrencies such as BTC or ETH.Margin requirementsUSDT-margined futures use stablecoins as margin.Coin-margined futures use cryptocurrencies as margin.Shared features
Both contract types:have no position holding time limitsupport both isolated and cross margin modesThis provides traders with flexible trading options.4. What Are the Advantages of USDT-Margined Futures?If you mainly hold stablecoins and do not hold other cryptocurrencies, USDT-margined futures may be the better choice. The MEXC USDT-margined market offers hundreds of trading pairs, with leverage up to 500x.Another key benefit is clearer profit and loss calculation. Because stablecoins are pegged to USD, traders can easily track actual performance, making risk management and capital planning more straightforward.5. What Are the Advantages of Coin-Margined Futures?Coin-margined futures are especially attractive for long-term crypto holders. You can hedge or trade without converting your assets into stablecoins, avoiding potential conversion costs or slippage.During bull markets, profits are paid in cryptocurrency. This means gains directly increase your long-term holdings of the asset you believe in, supporting both capital growth and value preservation.6. Which Is Riskier: USDT-Margined or Coin-Margined Futures?Coin-margined futures involve dual exposure to price volatility. When you go long and the market moves in your favor, you benefit both from the contract profit and the increase in the value of the underlying cryptocurrency.USDT-margined futures are generally easier to manage from a risk perspective because profits and losses are denominated in stablecoins. They may be more suitable for traders with lower risk tolerance or those who want more predictable returns.7. Can I Switch Between USDT-Margined and Coin-Margined Futures at Any Time?You can freely choose which contracts to trade and switch between USDT-margined and coin-margined products.However, positions cannot be converted directly between the two. To switch contract types, you must close your current position and open a new one manually.MEXC currently offers hundreds of USDT-margined contracts and dozens of coin-margined contracts (including BTC and ETH), supporting different trading needs and strategies.8. How Do I Select USDT-Margined or Coin-Margined Futures on the Trading Platform?Web:1) MEXC website → top navigation → Futures → select USDT-M Futures, USDC-M Futures or Coin-M Futures2) On the Futures trading page → click the dropdown button next to the trading pair → select USDT-Margined / USDC-Margined or Coin-MarginedApp:MEXC App → Futures → select USDT-M, USDC-M or COIN-MRecommended ReadingFutures Trading FAQ: Complete Beginner’s GuideExplanation of Terms on the Futures Trading PageGlossary of Futures Trading TermsHow to Trade Futures on MEXC AppHow to Trade Futures on MEXC Web
Common Questions About One-Way Mode and Hedge Mode
1. What Are One-Way Mode and Hedge Mode?In crypto futures trading, One-Way Mode means you can only hold a position in one direction per contract. You cannot hold both long and short positions at the same time for the same trading pair.Hedge Mode allows you to hold both long and short positions simultaneously on the same contract. The system records each position separately, and profit and loss (PNL) is calculated independently for each direction.2. What Are the Characteristics of One-Way Mode?Single-direction positions only: You can hold only one directional position at a time. If you place an order in the opposite direction, the system will offset your existing position.Simplified trading strategy: Focusing on a single market view makes strategies clearer and more straightforward.Faster entry and exit: Orders can be executed quickly without managing opposing positions, improving trading efficiency.3. What Are the Characteristics of Hedge Mode?Simultaneous long and short positions: You can hold both long and short positions on the same trading pair.Flexible strategy execution: Allows you to balance exposure or adjust long and short positions based on market conditions.Risk hedging: Maintaining positions in both directions helps manage uncertainty and volatility, reducing overall exposure to sudden price swings.4. What Are the Key Differences Between One-Way Mode and Hedge Mode?Position directionOne-Way Mode: only long or short, not both.Hedge Mode: long and short simultaneously.Strategy complexityOne-Way Mode is simpler and easier to manage.Hedge Mode requires managing two separate positions, margins, and risks.FlexibilityOne-Way Mode offers limited flexibility and does not support hedging strategies that require both directions.Hedge Mode supports advanced strategies such as hedging and profit locking.Execution speedOne-Way Mode generally enables faster entry and exit.Hedge Mode may require additional steps for complex strategies.Risk characteristicsOne-Way Mode concentrates risk and returns in a single direction.Hedge Mode can diversify risk but requires more advanced capital management.5. When Should I Use One-Way Mode or Hedge Mode?One-Way Mode is suitable for: Beginner traders, trend-following strategies, and those who prefer simple position management. It works best when you have a clear directional market view.Hedge Mode is suitable for: Experienced traders, arbitrage strategies, and long-term risk management. It is useful when market direction is uncertain or volatility is high.6. How Do I Set One-Way Mode or Hedge Mode on MEXC?Web:MEXC website → Futures Trading → ⚙ Settings → Position Mode → select Hedge Mode or One-Way ModeApp:
MEXC App → Futures → ... → Preferences → Position Mode → select Hedge Mode or One-Way ModeImportant:
If you currently have open orders or positions, you cannot change the position mode. You must cancel all orders or close all positions first.7. Which Is Better: One-Way Mode or Hedge Mode?Both modes are designed for different trading strategies and risk preferences. The best choice depends on your trading experience, strategy requirements, and risk tolerance.8. What Happens If I Place an Opposite Order in One-Way Mode?If you hold a long position and place a short order, the system will offset your long position automatically.If the short order size exceeds the existing long position, the long position will be fully closed and a new short position will be opened for the remaining amount.9. Can Hedge Mode Be Used for Risk Hedging?Yes. One of the main advantages of Hedge Mode is risk hedging. By holding both long and short positions, traders can reduce overall exposure during uncertain market conditions.10. Are There Restrictions When Switching Position Modes?Yes. If you have open orders or active positions, you cannot switch position modes. All orders must be canceled and all positions must be closed before changing modes.11. Does Hedge Mode Require More Margin?Yes. Since you hold two positions simultaneously, margin is required for both directions. This may increase margin requirements and capital usage.12. Which Position Mode Should Beginners Choose?Beginners are generally recommended to start with One-Way Mode. It is simpler, easier to manage, and helps traders focus on market direction.13. Is Hedge Mode Better for Short-Term or Long-Term Trading?Hedge Mode can be used in multiple scenarios, including short-term arbitrage and long-term risk management. It is particularly useful in volatile or sideways markets, or when hedging is required.Recommended ReadingFutures Trading FAQ: Complete Beginner’s GuideExplanation of Terms on the Futures Trading PageGlossary of Futures Trading TermsHow to Trade Futures on MEXC AppHow to Trade Futures on MEXC Web
A Complete Guide to Futures Information Terminology
Beginner users who are new to futures trading may find many of the professional terms on the MEXC Futures Trading page unfamiliar and may not be sure what they represent. On the MEXC Futures trading page, detailed information is provided for each trading pair. In this article, we will use the USDT-M BTCUSDT Futures trading pair as an example.Visit the MEXC official website and log in to your account. Then, click Futures in the navigation bar to enter the Futures trading page.Search for and select the BTCUSDT Futures trading pair, then click Trading Rules → View all futures trading rules to enter the Futures Details Information page.*BTN-View Futures Information Details&BTNURL=https://www.mexc.com/futures/information/contract_detail*Select the first tab, Futures Details. This page displays detailed Futures information for the BTCUSDT Perpetual Futures trading pair. You can also use the dropdown menu to select other trading pairs and view their corresponding Futures details.1. Basic Futures InformationPerpetual Futures: Evolved from traditional financial futures, perpetual futures differ in that they do not have a settlement or expiration date. As long as a position is not liquidated, it will not be closed automatically.Index Price: A composite price index calculated using a weighted average of prices from major exchanges. The index price displayed on this page is the BTC Index Price, which references prices from Bybit, HTX, and MEXC.Fair Price: The real-time fair price of the Futures, calculated based on both the index price and market price. It is used to calculate unrealized PNL and determine liquidation, and may differ from the last price to prevent price manipulation.Futures Size (1 Cont): Represents the value of one Futures cont. For USDT-M Futures, each cont is measured in USD value; for Coin-M Futures, each cont is measured in coin quantity. For example, the BTC Futures position size is 1 cont = 0.0001 BTC.Minimum Price Fluctuation: The smallest allowable price change for the Futures. For example, the minimum price fluctuation for BTC is 0.1.Minimum Order Quantity: The minimum amount per order for the Futures. For example, the minimum trading quantity for BTC is 0.0001 BTC.Limit Order Price Cap/Floor Ratio: The price of a limit buy order must be less than or equal to (1 + Cap limit ratio) × Index price. The price of a limit sell order must be greater than or equal to (1 − Floor limit ratio) × Index price.Maximum Limit Order Quantity: The maximum number of active limit orders allowed per trading pair.Price Protection Threshold: After enabling price protection, when a TP/SL order (trigger order) reaches its trigger price, if the price difference between the last price and the fair price exceeds the preset threshold for that Futures, the TP/SL (trigger order) will be rejected. Note that price protection only applies after it is enabled and does not affect historical orders that were not enabled.Liquidation Fee: When a position is liquidated, the platform charges a certain percentage as a liquidation fee.2. MarginInitial Margin: The minimum amount of margin required to open a position.Initial Margin Rate: Position value / Position margin. The initial margin rate reflects the leverage used.Maintenance Margin: The minimum margin required to maintain a position. When the margin balance falls below the maintenance margin, the position will be liquidated or reduced. Maintenance Margin = Position Notional Value × Maintenance Margin Rate.Maintenance Margin Rate: Calculated based on the position size and is not affected by leverage.Risk Limit: MEXC applies a risk limit mechanism to all trading accounts using a tiered margin model. The maximum leverage available depends on position size. The larger the position, the lower the available leverage. Users can manually adjust leverage, and the initial margin rate is calculated based on the selected leverage.Risk Limit Tier: Different Perpetual Futures have corresponding risk limits and tier increments. For example, BTC Perpetual Futures on MEXC are divided into 6 tiers.3. FeesFunding Rate: Based on the price difference between the Perpetual Futures market and the Spot market, funding fees are periodically exchanged between long and short traders. When the market trend is bullish, the funding rate is positive and long traders pay funding fees to short traders. When the market trend is bearish, the funding rate is negative and short traders pay funding fees to long traders.Note: Funding rates fluctuate based on market sentiment and vary across trading pairs. For details, please refer to Futures Information.Settlement Cycle: Funding fees for MEXC Perpetual Futures are generally settled every 8 hours, at 00:00, 08:00, and 16:00 (UTC). Funding settlement times may vary for certain trading pairs; please refer to the product page for details.*BTN-View Funding Rates&BTNURL=https://www.mexc.com/futures/information/funding_list* Liquidation Fee: When a position is liquidated, MEXC charges a certain percentage as a fee. For example, the liquidation fee rate for BTC Futures is 0.04%.4. OtherAuto-Deleveraging (ADL): When a trader's position is liquidated, any remaining position is taken over by MEXC's Futures liquidation system. If the liquidated position cannot be closed on the market and the mark price reaches the bankruptcy price, the ADL system will reduce positions of traders holding opposing positions. The order of reduction is determined by leverage and profit ratio.Understanding Futures trading terminology is only the first step in learning how to use Futures trading tools. To truly master them, you need to apply what you've learned through actual trading. Before starting live Futures trading, you can practice using MEXC Futures Demo Trading, and then proceed to live trading after becoming familiar with the platform.Recommended Reading:MEXC Futures Funding Rate: Calculation Methods and How to View Funding RatesFutures Trading FAQ: A Complete Beginner's GuideTime in Force (TIF) for Futures Trading: A Complete GuideFutures Trading Page Terminology GuideHow to Trade Futures on the MEXC AppHow to Trade Futures on MEXC Web
Futures Trading Page Terminology Guide
For beginner users, Futures trading is more complex than spot trading and involves a wider range of professional terms. To help you get started quickly, this article provides a systematic explanation of the key terms used on the MEXC Futures trading page, making it easier to understand and use the platform.*BTN-Futures Trading&BTNURL=https://www.mexc.com/futures/BTC_USDT*1. Basic TerminologyPerpetual: Perpetual means ongoing without an expiration date. Commonly known as Perpetual Futures, these products evolved from traditional Futures but do not have a settlement or expiry date. As long as a position is not liquidated, it can remain open indefinitely.Price Change (%): Price change refers to the percentage increase or decrease in price over a specific period. Formula: Price Change (%) = (Closing Price − Opening Price) / Opening PriceIndex Price: A composite price index calculated using a weighted average of prices from major mainstream exchanges. The index price shown on the page is the MX Index Price.Fair Price: The real-time fair price of the Futures, calculated based on the index price and market price. It is used to calculate unrealized PNL and determine liquidation, and may differ from the last price to prevent price manipulation.Funding Rate/Countdown: The current funding rate for the ongoing period. If the rate is positive, long positions pay short positions. If the rate is negative, short positions pay long positions.2. Order Book TerminologyOrder Book: A window for observing market activity during trading. In this section, users can view individual trades and the relative strength of buyers and sellers.Market Movers: Assets that experience significant price fluctuations within a specific time range. This tool helps traders quickly identify potential opportunities based on price movements and other indicators.3. Trading TerminologyOpen Position/Close Position: After entering the price and quantity based on your market outlook, you can choose to open a long or short position. If you expect prices to rise, open a long position. If you expect prices to fall, open a short position. Closing a position means selling the Futures you previously opened. Open but unsettled positions are referred to aspositions, which can be viewed underPositions at the bottom of the page.Open Long: Opening a position based on the expectation that the asset price will rise.Open Short: Opening a position based on the expectation that the asset price will fall.Margin and Margin Mode: Margin refers to a portion of funds that users deposit as financial margin in order to participate in Futures trading. This deposited amount is known as margin. Margin modes are divided into isolated margin mode and cross margin mode.Isolated Margin: Under isolated margin mode, a fixed amount of margin is allocated to a specific position. If losses on the position reduce the margin below the maintenance margin level, the position will be liquidated. Users may also choose to add or reduce margin for this position.Cross Margin: Under cross margin mode, all cross positions share the available cross margin of the corresponding asset. In the event of liquidation, traders may lose the entire margin as well as all cross positions under that margin asset.Order Types: Order types include limit order, market order, chase limit order, trigger order, trailing stop, and post only.Limit Order: A limit order is an order to buy or sell at a specified price or better. Execution of a limit order is not guaranteed.Market Order: A market order is an order to buy or sell immediately at the best available market price.Chase Limit Order: A chase limit order is a type of limit order placed at the best bid or ask price. It dynamically adjusts the entry price based on changing market conditions until the order is filled, canceled, or reaches the maximum chase distance.Trigger Order: Users can pre-set a trigger price, order price, and quantity. When the market price reaches the trigger price, the system will automatically place the order at the specified order price. Before the trigger order is successfully activated, positions and margin will not be frozen.Trailing Stop Order: A trailing stop order is a strategy order that submits an order to the market when prices retrace. The actual trigger price is calculated as:Highest (lowest) market price ± retracement amount (price difference), orHighest (lowest) market price × (1 ± retracement percentage)Users can also set an activation price. The trigger price calculation only begins after the order is activated.Post Only: Post only orders will not be executed immediately on the market, ensuring the user always acts as a maker. If the order immediately matches with an existing order, it will be canceled.Take-Profit/Stop-Loss (TP/SL): A preset closing order with trigger conditions (take-profit price or stop-loss price). When the last price, fair price, or index price reaches the preset trigger price, the system will close the position at the best available market price based on the predefined quantity, allowing users to lock in profits or avoid unnecessary losses.Limit Take-Profit/Stop-Loss: A limit TP/SL order is a preset order where users specify the stop price, limit price, and buy/sell amount. When the last price reaches the stop price, the system automatically places a limit order at the specified limit price.Coin-Margined Futures: Coin-Margined Futures provided by MEXC are inverse futures, where cryptocurrency is used as margin and serves as the base currency. For example, in BTC-Margined Futures, BTC is used as the initial margin and for PNL calculation.Stablecoin-Margined Futures: Stablecoin-Margined Futures provided by MEXC (for example USDT-M Futures) are linear derivatives quoted and settled in USDT. USDT is a stablecoin pegged to the value of the U.S. dollar.4. Futures Calculation TerminologyPNL Calculation: Enter your entry price, futures position size, and leverage, then set your expected exit price to calculate the final profit amount and return on investment (ROI).Target Price Calculation: Enter your entry price, Futures position size, and leverage, then set your desired ROI to calculate the target price and profit amount.Liquidation Price: Enter your entry price, Futures position size, and leverage, and select the margin mode (cross or isolated) to calculate your liquidation price.Maximum Position Size: Enter your entry price and leverage, then input the amount of margin available to calculate the maximum Futures position size you can open for long or short positions.Average Entry Price: If you open multiple Futures positions for the same trading pair, enter the different entry prices and corresponding position sizes to calculate the combined average entry price for that trading pair.Funding Fee: Enter the fair price, position size, and current funding rate to calculate the amount of funding fee you need to pay or receive.Note: Futures calculation input terms are for reference only. Actual Futures trading calculations are subject to live trading.For beginners, before placing your first Futures trade, you can practice using MEXC Futures Demo Trading to gain hands-on experience. After becoming familiar with the platform's features, you can then proceed to live trading.*BTN-Futures Demo Trading&BTNURL=https://futures.testnet.mexc.com/futures/BTC_USDT*5. Order Terminology5.1 PositionsPosition Size: The number of open (unclosed) Futures positions.Average Entry Price: The average cost at which a position is opened. For example, if a user opens 100 cont. of long positions on MXUSDT Perpetual Futures at 2 USDT, and later opens another 100 cont. of long positions in the same direction at 2.1 USDT, then the average entry price is calculated as (2 × 100 + 2.1 × 100) / (100 + 100) = 2.05 USDT.Fair Price: A mechanism introduced to prevent user losses caused by abnormal price fluctuations on a single platform. It is calculated using weighted price data from major exchanges and more fairly reflects the true market price. For more information, please refer to Index Price, Fair Price, and Last Price.Estimated Liquidation Price: When the fair price reaches the estimated liquidation price, the position will be liquidated. To learn more about liquidation, please refer to What Is Liquidation? A Complete Guide to Its Mechanism, Price Calculation, and Risk Management.Margin Ratio: Used to measure the risk level of a position. The lower the margin rate, the relatively lower the position risk. When the margin ratio reaches 100%, the position will be liquidated.Margin: Position margin includes the initial margin and closing fees. In isolated margin mode, additional margin can be added to the position.Unrealized PNL: Calculated based on the fair price or the last price. Position ROI = Unrealized PNL / Initial margin. Therefore, ROI is only related to the current leverage level and is not affected by increases or decreases in margin.Realized PNL: All realized profits and losses generated by the position, including trading fees, funding fees, and PNL from closing positions.5.2 Open OrdersAmount/Filled Amount: Order amount refers to the intended execution size set by the user when placing an order. When the order amount is large, it is usually filled in multiple smaller orders. Filled amount refers to the amount that has actually been executed. When the order amount equals the filled amount, it means the order has been fully filled.Order Price/Average Fill Price: Order price refers to the expected execution price entered by the user. For limit orders, the order price is the price entered by the user. For market orders, the order price depends on the actual execution result. When large orders are split into multiple sub-orders, the fill prices may vary due to market fluctuations. The average of these execution prices is the average fill price.5.3 Position HistoryAverage Entry Price: The average cost of opening the position.Average Close Price: The average price of all closing trades.Realized PNL: All realized profits and losses generated by the position, including trading fees, funding fees, and PNL from closing positions (does not include fees offset by vouchers or MX deductions).5.4 AssetsTotal Equity: Wallet Balance + Unrealized PNL.Wallet Balance: Total transferred-in funds − total transferred-out funds + Realized PNL.Available Margin: The amount of funds available for opening new positions.Understanding Futures trading terminology is only the first step in learning how to use Futures trading tools. To truly master them, you need to apply what you've learned through actual trading. Before starting live Futures trading, you can practice using the MEXC Futures Demo Trading to become familiar with the platform, and then proceed to live trading.Recommended Reading:MEXC Futures Funding Rate: Calculation Methods and How to View Funding RatesFutures Trading FAQ: A Complete Beginner's GuideTime in Force (TIF) for Futures Trading: A Complete GuideA Complete Guide to Futures Information TerminologyHow to Trade Futures on the MEXC AppHow to Trade Futures on MEXC Web